JVC KDG320 In-Dash Satellite Radio CD Player (Car CD Receiver) "check wireing" Questions

I have a jvc kd-r45 it keeps on saying warning unit check wiring then reset The check wiring message suggests a short probably in a speaker wire. Check that the terminal leads for the speakers are ...

...wire and mute wire? Not sure on mute wire. To find remote wire get a multimeter turn car off and check all wires on harness for power. Then turn car on/acc and check again the one that has power ...

my kdc-mp7028 suddenly turned off while i was driving,i checked the wiring and it is wired fine,the red security light behind the faceplate still blinks but nuthing else will happen,i also checked all

...and it just quit working, Nothing lights up. Pulled radio out of dash removed wiring plug and checked fuse ok. wired direct to battery but nothing happens. Also cant get face plate off without ...

...depending on the radio usualy goes to the ignition on hot wire and red to a constant hot wire. Check the radio wiring diagram or list. One of the power wires has to go to a full time power

...to work? Buy a cheap 12v circut wire tester and see if your getting juce from the remote wire. Also check fuses. If no juse just tap the radio acc wire and run it to the remote amp wire. Also check ...

...my wires together. i attached all the colored wires together and the system is still not working check your power source...try red and yellow together and the black...you can tap them to the ...

...the stereo go to the car's wires Dear sir if you know how to read a continuity tester then you can check your desire wire . now tester keep it on continuity mode and bring some out your stereo and ...

Pioneer DEH-P390MP will not turn on Check the fuses in your car and on the head unit first, and then check for 12 volts to the power wire and acc wires. Check your ground wire for an open line. If ...

...I am pretty sure I have all the wires hooked up properly but I get no power to the radio. I have checked the wired with a amp meter and get no response. How can I get power to these wires?? Thanks ...