...making a rattling noise like the bobbin case is loose Try these suggestions 1. Change the needle--use a needle that's for the fabric being sewed 2. Rethread the machine--top --make sure to use every ...
Question about Janome Sewing Machines
cleaned out lint from bobbin area and bobbin thread is still bunching and no stitch is being made. Hope you can help Try these suggestions 1. Change the needle--use a needle that's for the fabric ...
...bobbin thread has started making a "bird nest" below the plate. I took the cover pieces off to clean it and when I put everything back on, I had this problem with the bobbin getting tangled up. Then ...
...being sewed 2. Rethread the machine--top --make sure to use every thread guide 3. try a different bobbin--make sure bobbin is inserted correctly into the bobbin case & make sure the bobbin is ...
Question about Sewing Machines
upper thread gets caught underneath when trying to bring up the bobbin thread try changing the needleif it's a top loading bobbin make sure the bobbin is turned the rightwayif it's a front or ...
...being sewed 2. Rethread the machine--top --make sure to use every thread guide 3. try a different bobbin--make sure bobbin is inserted correctly into the bobbin case & make sure the bobbin is ...
upper thread gets jammed in bobbin area the upper thread gets caught in the bobbin area and stops my machine because of huge clumpy knots on the inside of the bobbin area and the underside of my ...
Question about Husqvarna Sewing Machines
Unable to remove bobbin from bobbin threader till almost all thread removed. Viking 1+ Fills the bobbin fine but then can't pull the bobbin off until I start removing the thread from the bobbin and ...
...try a new needle--one that is for the fabric being sewed clean under the needle plate and in the bobbin area for lint rethread the machine top and bobbin if the bobbin is top loading make sure the ...
skipped bottom stitches try changing the needle make sure the bobbin is inserted correctly make sure the bobbin is not warped make sure the bobbin is turned the right way in the bobbin case make sure ...
28 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions