...number. However, that tension dial is meant to be used for tweaking tension. Generally, tweaking is required whenever the type of fabric, needle, or thread are changed, ie thicker fabric like denim ...
tension dial to a lower number. Repeat the process until the thread is properly tensioned on both the top and bottom of the fabric. If you have any difficulty with these steps or if you have any other
tension if it is too tight, turn your knob so the numbers are decreasing. Try ½ to 1 number lower, then test the stitches on a piece of scrap fabric. Continue until it looks even on both sides and you
Question about Elna Sewing Machines
...and which way is tighther Most manufacturer tension default settings is the midpoint between the high and low number on the tension dial. Usually the higher the number, the tighter the tension...
Question about Sewing Machines
...here. First you have to set the Bobbin Tension, then you can work on the upper tension and the numbers.. https://www.google.com/search?q=sewing+machine+tension+troubleshooting
...number the tighter the tension. For basic stitching, it is generally a good policy to start out with the tension set at the midway point between high & low numbers and then tweak it for your ...
Question about Sewing Machines
...tension settings is how different stitches are created. Be sure thread is in the tension docs properly, a general rule is that the tensions on the threads that go to the needles are set at a higher # ...
Question about Husqvarna Sewing Machines
...number. However, over time with use, that setting may shift. The ideal tension setting for your machine is when the top and bobbin threads meet in the middle of the fabric. threads sewing machine ...
Question about Janome Sewing Machines
...quilting and it did not help. I need to know the regular tension settings for my machine. Factory standard tension setting is the midway point between high & low number. However, machines
...the disc or at the side - if on side a arrow to set at the numbers ) the higher the number you set the greater the tension on the thread - well that's for a Jones machine it may be reverse on yours! ...
340 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
235 Questions