...Oven over heat Replace Sensor F3-E3 Cleaning Temp over heat Replace Sensor F5-E0 Door Error Check Door F5-E1 Door Latch Check Latch F5-E2 Door Switch Check Switch ...
...Oven door locked, error code F5E1 Whirlpool-KitchenAid-Roper Appliances: Oven Fault Codes: >>Exception Note:<< Chart below does not apply to Whirlpool Models using the "Y" line in the ...
Question about Kitchen Ranges
...oven was set at 350. During the baking cycle it overheated, locked the door and had to be shut off to cool down. it was not in the cleaning cycle and still showed 350 on the pannel. After turning it ...
...WHIRLPOOL OVEN CLEANED ABOUT 30 MINUTES AND THEN STOPPED AND WENT INTO E2 AND F1. THE DOOR IS LOCKED AND WON'T OPEN. WE HAVE TRIED EVERY THING THE BOOK SAID AND NOTHING HELPS. DO YOU HAVE AN
...oven door locks and my oven turns off. What does this earor message mean? We have parts for your Kenmore range. You have a series of 3 numbers before the model number that's on your range. Those ...
...Range Control/Clock(ERC) F2 - E0 Oven temp too high 1. Test operation of door lock on self-clean models 2. Test relay contact operation 3. High resistance in oven temperature sensor F3 F4 F6 F7 F8 ...
...locked out of my oven. The oven is not on. Do you have any suggestions. I appreciate any help. Cisco Hi dcisco, Happy to help you! I would advise you on this occasion to call service. These guys are ...
...or other debris. Just moving the latch back and forth loosened the scale that was making it stick, and it worked again. e2 f3 oven to hot e1 f5 check door / latch switch if its working now dont ...
...oven temperature is too high. Test the door lock and the relay operation, and correct as necessary. A two-digit F3 code means an open temperature sensor or thermal fuse, so those parts must be ...
68 questions posted
Usually answered in minutes!
179 Questions
87 Questions
81 Questions
70 Questions
69 Questions
