Magicard Tango 2 Printer "loose pinch roller" Questions

...pinch rollers. Start printing then push on the roller with your finger to try and 'rough it up' (if it clicks you are pressing too hard). The fault appears to be that the pinch rollers are loosing ...

...loose wood fiber that can depart from the sheet and build up on rollers. solucionar el problema por completo In the paper path above tray 2, there are 2 pinch rollers that sometimes pop out of place. ...

...it pinches the paper on the right side and stalls! my name is Joe, please help! check for pieces of loose paper,shake printer upside down to get all junk out of it The Canon printers have problems ...

...pinch rollers are really clean. 3. ** Check the warranty status first! *** Remove the right-hand side panel (2 screws on the side, 3 at the back). Check for free play on the card transport stepper ...

loose foreigh material might be the problem, but NO LUCK. Help -- Thanks -- Dave Two things you could try: 1) Your pickup rollers are dirty/worn: Remove the tray, you should see either in the front or

roller and see if it warms up. What was the copier doing before this? I would look over the work you did before and maybe look for a loose connector or pinched wire or a short. Need a little more info

...roller and fully remove it. Insert a flat-blade screwdriver into th indentation at the front of the separation pad and twist the screwdriver blade gently to loosen the pad see (inset). When loose, ...

pinch cam. Jabba0737 I have a Samsung CLP-300 and an ML-2010 laser. My poor paper feeding was solved by lifting up the front of the machine by a few inches. I use cardboard boxes. They sit nicely next

loose bearings from the chrome guide roller. It has mini roller bearings on each end that can slide off. Clean all rollers with acetone, making sure there are no accumulations of toner on any rollers.

...loose crumbs of paper. Put about 20 sheets of paper into the printer and put this cardboard as the first sheet. Pressed the copy button. When it started to attempt to feed, I forced it through. What ...