...rubber smell, then the motor cuts out before it burns out. Any advice would help. you may have a seized up pulley on your pump. this will burn the belt. also check the pulley on the end of the
motor bushings may have seized. Best access is from above to check.If you can spin the drum with ease from the inside, the belt broke or is off. If it will not turn, the motor bushings may
Question about Kenmore Washing Machines
motor itself is seized. Test power(with ac 120v meter) at motor, which should be located underneath the machine, just under tub.If you have power right to motor, then it is very likely that it is your
washer for about 6 years. Does it agitate and spin at the same time? the motor has a pump on one side and gear case on the other. if the gear case is seizing then the pump is lagging because the motor
not spin at all and makes a humming noise, sounds like something has seized up in the back of the unit. This could be a belt broken, motor seized up, or the transmission, if your unit has one, is gone
Question about Maytag Washing Machines
...kit that has worn. That kit includes the big yellow pulley under machine at center and btake cam and associated washers and bearing. It also could be drain Pump seized up or could be motor is
...the pump is electric. separate from motor to operate machine. Perhaps you motor is fried? remove belt from motor if motor works transmission seized , rebuilt from Dasa Mfg 1-866-327-2634
...drain pump is connected to the front of the motor, if you remove see if the motor works without it. If it does work, check to see if there is something stuck inside the drain pump or if it is
Question about Kenmore Washing Machines
...MOTOR IS SEIZED BY TIPPING MACHINE FORWARD AND SEE IF YOU CAN TURN THE MOTOR BY HAND. IF MOTOR TURNS FREELY , YOU HAVE A START CAPACITOR PROBLEM. FXIT washer makes a rattling noise when it is on the ...
...WASHER WASHES FINE UNTIL THE SPIN CYCLE IT STARTS SPINNING AND THEN STOPS AND MAKES A NOISE LIKE ITS PUMPONG THE MOTOR IS REAL HOT. tHE MOTOR IS 5KH61KW2516HS Sounds like the bearing is seizing up, I ...
118 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions