Bunn 2 ultra sensor short The screen pop up with error message sensor short , the right part did not freeze much remove the back cowling on that side and clean the sensor boar with canned air (in ...
Question about Bunn Kitchen Appliances - Others
If I already changed de torque sensor and i still have problems with de legen of sensor torque error what cai I do to fix it. the post that spins in the sensor should have 2 long posts sticking out. ...
sensor open left side not getting cold and torque sensor says hold ultra button for three seconds This is going to be a project: 1, the hold for 3 second on the ultra button is for the filter in the ...
left torque sensor error remove the back cowling and blow off the sensor with canned air. usually dusty
...the problem is the torque switch next to the motor (if it's a cab or a ugo machine) or the torque sensor (for torque sensor
Question about Bunn Kitchen Appliances - Others
...sure that the red and white lights on the board have no product on them. I AM GETING LEFT TORQUE SENSOR ERROR ULTR060091 the shaft off of the motor has 2 pins spaced apart and both pins go past
...does not turn what parts are needed as above what does the display say? the shaft has an optic sensor. if the shaft pins or the sensor board are broken, it'll say sensor error. if the torque ...
paddle does not turn What does the display say? the shaft has an optic sensor. if the shaft pins or the sensor board are broken, it'll say sensor error. if the torque springs are broken, replace the ...
In my machine granizado appears senson open i can do for remedying If its a torque sensor error then either there is product on the pins for the shaft or the sensor board is damaged or the lens have ...
it says sensor open the sensor board is in the back behind the motor cowlings. open one up and the board is in front of the motor. check the wire harness to it, and check to see that it is not damaged
91 questions posted
Usually answered in minutes!
2 Questions
