Hotpoint Aquarius WMA56 Front Load Washer "transit washers working" Questions

LHW0050PQ will not transition from wash to rinse - instead END light flashes. Must turn to STOP, wait 2 minutes, turnoff machine, turn back on and then restart on a rinse cycle. Otherwise everything ...

...won't work. have the lag bolts been removed in the back - the ones used to stabilize the drum in transit? I am having the same problem and it looks like the water pump went

I left the transit bolts in our "brand new" zanussi washing machine and am afraid to use it as I do not know what damage might have been done. Highly unlikely any damage will have been done so long as

Washer won't spin unless you lift lid. LSR5132PQ When washing cloths on normal and it transitions to spin cycle, it won't spin. If you lift the lid, and place it down it proceeds to work correctly. ...

...The springs seem fine but what other things should i be looking at that could have broken in transit. make sure that the tub has full movement and bounces back to the center. if it doesnt its ...

...everything is fine. Resealed the gearbox case, hope that will last or I will have to changeout the transition gearbox soon. The unit is working with the above fix (change clutch) for $20. Not bad

...no agitation... except for me. Model 970-C4907200 You could check motor plug has not fallen off in transit/ also belt..good ...

...transit bolts from rear Some washing machines come with a ridgid piece of steel mounted on the cage at the rear of the machine. This is purley for transport. It must be removed in order for the ...

...for it Unless your machine was way out of balance you should not really have damaged anything. The transit bolts are there to stop the drum from banging around during transit and unless they have ...

drum transit stablisers have not been removed. how do i remove them ? like a regular bolt basicly there long. as far as the plasic peice do not remove the bolt commpletly from that becaus you will ...