Hotpoint WMA54 Front Load Washer "drum not turning" Questions

drum will not move first of all my wt540 AQUARIUS HOTPOINT MACHINE,was making a very loud noise when on spin,like banging against something,now the drum will not move. please help. Try to remove drum ...

Drum will not turn. I started a cycle. The drum filled with water as usual but the drum won't turn. It can't be turned manually either. Sounds like you've got something stuck in between the drum and ...

drum is not turning then either the belt is slack and slipping, or the drum is jammed. possibly and item of clothing is stuck between inner and outer drums. remove belt and turn drum pulley, it should

drum from turning; such as a sock falling into the tract where the drum rotates, or a bad seal. Check the drum for movement by hand, and see if you can free it up manually. Last: check alignment. Look

...turning. If the Drum Motor is not turning, you may have a bad Drum Motor or Motor Control Board. A trained professional should be contacted to perform these repairs if you are unsure about the repair ...

Wfl 2260 5 years old The drum does not turn the Wfl 2260 5 years old The drum does not turn the pump works the drum fills and empties just does not turn if you can here the motor running have you ...

drum has just stopped turning even by hand thanks craig If you cannot turn the drum by hand, then there are a couple of possibilities that come to mind. 1- it is possible the drum bearings have siezed

drum not turning My drum stopped turning, although motor was working fine on inspection. Motor was turning but rubber belt and drum weren't. Any suggestions?? If you are certain that the motor was ...

bosch wfk 2800 drum makes a noise when turned around when drum turns around it makes a noise as metal on metal, however this only happens with the drum in one particular position. I hear the noise ...

Drum not turning Machine starting okay i.e. water fills up but drum is not turning. I can hear it clicking through the cycle but drum doing nothing. I,ve just put in new carbon brushes but still no ...