...threw the circuit breaker. I ran downstairs and flipped the breaker while my sister manned the oven. When I flipped the breaker, the oven sparked right inside the control panel near the knob and blew ...
...threw the breaker,which means the whole stove shut down. Switched the breaker back and the oven light and a burner "light" came on even thught the burner was not on, and it did not heat ...
...breaker on. If the switch stays in place and is not thrown back to the middle or right, go turn your oven on. If it threw the switch you have a short of some kind, I recommend calling an electrician ...
...threw the breaker. When I turned the breaker back on, neither element worked inside the stove, but the all the eyes on the range and all of the control panel functions still work and light up. (you ...
...threw the breaker for the range/oven hoping the electronics might need to be reset. However, the oven still overheats. The oven element was replaced 6-9 months ago and there were no problems with the ...
Question about KitchenAid Kitchen Ranges
threw the breaker at the electric panel and re-energized the unit but it still displays the message. Had the same message on my display after spilling water on the cooktop. Obviously, the seal (rubber
...threw the breaker to get it to cut off. Help. f3-e2 is a failed oven temp sensor. it is number 23 in this diagram http://lookup.bellparts.com/diagramenlarge/whirlpool/38969/00149623 it is part number ...
...threw the circuit breaker, hoping it would reset when we turned it back on. When we did that, the panel asked us to set the clock, which we did with no problem. But, as soon as that was done, it went ...
...threw the breaker to no avail. We lost the entire display on the oven and I did some checking. As for control board I can pass along some info I found at another site: Replace the capacitor C3 ...
21 questions posted
Usually answered in minutes!
329 Questions
102 Questions
63 Questions
26 Questions
21 Questions