Mag Innovision LT976S 19" Flat Panel LCD Monitor "set time screen saver stays" Questions

on the "Power Saving" settings under "Screen Saver" settings, if you have Windows XP. Like "Turn off monitor after" a certain time. Even if you don't have Windows, please check the Power Save settings

...time for the screen saver if desired and click Apply. Then click on Change Power Settings. This brings up the Control Panel > Hardware and Sound > Power Settings. Then click on Edit Power ...

...stay on The problem maybe with the settings in your computer. Check if the screen savers are off and also make sure that the computer doesn't turn the display unit off after some time of

screen with amber light and won't wake up until I reboot the computer. Last night it did this several times, within 20 minutes of starting up each time. I checked the power settings and made sure they

...screen saver then change the time..... I just found after hooking one of these Sceptres with the exact same problem up to a computer that already had a lcd hooked up and the computers settings were ...

...time i have to hold the power button down where it stays on Hello, 1. check the power cords- make sure all are snug. 2. check and make sure no pins are bent in the cord to the computer 3. make sure ...

...up. You didn't say your operating system so going to do some fishing. look under screen saver or sleep settings. Increase the time until it goes to sleep and your problem should be solved. Good

...time can be affected, both of which are accessed through the Control Panel that is normally an item on the Start menu. Check the Display folder first and look for Screen Saver. This can be turned off ...

...screen savers. this is only important if you leave the monitor on for a long time with no changes taking place in terms of what is being displayed. if you leave a static image on for hours you will ...

...Set the Power Options to not enable hibernation on Hibernation Tab. Put the computer into sleep mode by briefly pushing the Computer's Power Button. Then bring it out of sleep by tapping "Space Bar" ...