BenQ FP531 15" LCD Monitor "computer turns continuously" Questions

...I let it rest overnight only to find the next day its still white. I plugged it into my mothers computer hoping it was the gfx card but it is still continually white. I was wondering if it could ...

...BENQ FP531 continuosly... I have a BENQ FP531 monitor. My problem is every time I turn on the computers, my LCD monitor will start blinking continuously. I have to hit the monitor softly for ...

...turns on then off then on then off was working fine yesterday i turn my computer on and it will boot up but i cant see anything on that screen Test your PSU or replace it if your power supply units ...

monitor shuts off during use My BENQ FP72G starts fine but after 30 min turns off. I wait a few min, turn it on and it lasts about 10 min and turns its self off. This 10 min issue continues.I blew the

my lcd monitor turn off and on continuously Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some ...

...unplugged the monitor cable to use with her laptop and the TV. Now when it is reconnected and the computer turned on the computer boots and windows starts to load. Then I get themesage 'No Signal ...

Benq FP567s Black screen, power on, soldering didnt work I have a Benq monitor thats had problems for a long time, about a year ago it started suddenly losing power and then the power light would ...

BenQ FP72G+ 17" LCD Monitor NO DISPLAY Thanks so much for your help ! =) I've found 1 X 2SC5707 ( short circuit ) I've also found 1 X FU9024N (HexFET Power MOSFET) ( short circuit ) are there any ...

board, however, I wouldn't start tearing and replacing based on your description just yet. With the computer on and the monitor power LED green shine a flashlight in the lower left hand corner of your

Hi, Monitor will not turn off when computer shuts down and continually goes through a circle of solid blue, yellow, red, white, black screen which is in a loop and continues until monitor is manually ...