...transit spacers for my next move, and is there any internet listing of Malber repair people? I live in Kitchener, Ontario Thanks for any help you can offer Hi from retired Englishman in SW France, ...
...repair. if it is a top loader machine , use the spirit level across the top of the agitator not across the lid as many lids are now sloping a bit make sure that all of the transit packing and bolts ...
...in this post but I discuss the process for monitoring the control board input for pressure switch transitions. You can go to page 16 of the SM to monitor pressure switch level transitions that ...
...repair the machine for the same problem, like it lighting up F51 and then they have to replace the machine as a lemon while the machine is still under warranty. I hope this was of help. The delivery ...
...Replace/repair as necessary. Also - be sure the drum locking (transit) pins were removed by the installer. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE
Question about Blomberg Washing Machines
...transit bolts do is fix the drum in place. If you ran the machine, all that would happen is that it would try to jump around during spin. The groan, sounds like a bearing is seized or the motor is ...
Question about Malber Washing Machines
...is overheating and shutting off. Usually is the thermostat not working properly. Make sure the transition vent pipe that conntects the dryer to the vent opening in your floor or wall is the ...
...time and money. oh' ,, and the problem sounds like the motor might be having trouble engaging the transition box.
...can help you with that. We will need to go into Service Mode and look to see if the pressure switch transitions take place during the water fill cycle. I assume if you pull the 120VAC power cord or ...
246 questions posted
Usually answered in minutes!
49 Questions
8 Questions
9 Questions
4 Questions
