Malber WD1000 Front Load Washer/Dryer "cycle won start" Questions

...won't start cycle. would like to either completely stop this cycle and start anew or continue with the cycle (had started about 2 min before adding article). Try unplugging the machine for a few ...

...cycle won't start The machine lights up when powered on and allows me to select a cycle, but the door will not lock and does not allow for the cycle to start. Tried turning off and turned circuit ...

...cycle only flashes and washer will not start. No error code is displayed.MO MOD 110 42922 022 TYPE 119-AKP 720/WT see this causes and fix it. God bless youIf the washer won't start, check to be ...

...won't agitate. Started happening a couple weeks ago if the lid was lifted during the cycle at any point, cycle would stop. Now I can't get it to anything but fill with water. Your lid ...

...cycle, agitates, but won't drain. Lid switch checked good and I by-passed it to confirm. If I manually pump the water out the spin cycle starts Runs a partial cycle, fills, agitates, but ...

...won't start could be a faulty door lock as this is required to be locked before a signal is sent to the controller to start the wash cycle, try replacing the door lock, there quite cheal only a ...

...cycle....and won't start any cycle Hello & Welcome to FixYa When the washer fills but does not agitate or spin then you can check if the lid switch is fine. You can jump start the lid switch ...

...cycle and it won't drain when it's on the spin cycle it didn't start doing this until about 2 months ago. this is driving my husband and i crazy. there is a screen that needs to be ...

...cycle won't start. spin cycle works, changed motor still won't work Its either in the lid switch or timer. Examine the lid switch. Try starting the wash cycle and press in on lid switch to ...

won't leave wash cycle The washer can be turned off and door opened. Water inside. Washer can be turned on by pushing Power and Start. Wash cycle begins. After awhile Start button begins blinking.