Husqvarna 362 365 371 372 385 570 575 576 Chain Adjuster Tensioner Assembly "chainsaw idles throttle" Questions

...chainsaw will run only full throttle and when you let of of the trigger it wont idle it will die Hey on the carburetor there is 2 mixture screws 1 is for idle up to 1/4 throttle the other is for 1/4 ...

chainsaw runs fine than goes full throttle all by its self and cannot shut it off with switch. Kill switch is broken or disconnected. Throttle linkage is broken or disconnected or idle is set way too ...

...idles way too fast and will not correct with the sow speed adjustment Make sure that you are adjusting the idle speed screw, not the idle jet screw (L). If you are adjusting the proper screw, then it ...

what do theT H L adjustment screws mean These are the fuel adjustment screws, the L screw will adjust the fuel mixture from idle to half throttle, the H screw will adjust the fuel mixture from half ...

...chainsaw idle/or to engage(touch) the throttle screw to make the adjustment viable. I opened the trigger handle assy (3 screws). I took about 4mm of the outer black plastic covering off the trigger ...

Husqvarna 51 idle seems to struggle, runs OK when I throttle then chokes and dies out as soon as the throttle is released. What can I do? will it start right back up after it dies? you could use a ...

...chainsaw idle to high how do I fix the idle,I see the low and high screws First there is an throttle idle screw that adjust the amount of throttle at idle try turning it ccw until it idles down. If ...

chainsaw reving full,not the idle screw or throttle cable Remove the air cleaner assembly so that you can see the action of the throttle mechanism. If nothing around the carburetor throttle arm is ...

...chainsaw idles too fast Intermittently, while using my Ryobi C4620 chainsaw, it will decide to idle at a very high speed, almost at normal cutting speed. Adjusting the idle-setting screw does not ...

saw is idling to high will not adjust down. What do I do. Open the carburetor area cover and remove the air cleaner so that you can observe the throttle arm and the idle speed screw which stops ...