Question about HP ScanJet Office Equipment & Supplies
...Bottom or Base of HP Scanjet 2400. Because the guide to move the sensor inside the scanner not working. I want to scan my ID Card urgently. Please help. ID Cards Safety Signs Web Designs Print ...
Document Feeder My HP scanjet 8250 scans perfectly from the flat bed but it will not allow to use the ADF (feeder). It keeps saying there is a paper jam when the paper is just sitting in the tray. The
Question about HP ScanJet Office Equipment & Supplies
...scan. The pin must have something to do with the scanner head going back and forth. I think it could fit on the drive belt and seems to be the only place it could go. Nothing appears to be broken ...
...scan again, and see what part is not moving. The stepper motor engages, and spring moves, then another stepper motor engages and clutch should simultaneously move. More often than not, the clutch ...
We have a Canon DR-9080C scanner. When scanning in Duplex on pages with data on both sides, the back side of each page is coming out unreadably faint. The header and any overall large blocks of black ...
the scanner works but makes a grinding noise that is getting worse Normally Canon scanners work well for long time, Change the pickup rollers for every 250,000 pages and check other rollers for every ...
...in ADF are not moving select in software - adf front side , back side or duplex then only it will scan from adf.If you have selected adf and its not scannning then pls check whther the rollers are ...
Question about HP ScanJet Office Equipment & Supplies
...scan the 510 begins to pull the document into the ADF but then stop at or near the two small black plastic rollers in the curved cover. It doesn't seem to want to make the turn to feed downward. The ...
...the glass scanning surface. After inserting it between the glass and the rubber roller, move the paperclip/alcohol pad back and forth between the two, let dry for a few minutes and try scanning
...scan or feed the second page. Did I do something in the move? try correcting the page width and make sure one page goes through at a time also you can press the bottom of the paper and it will feed ...
293 questions posted
Usually answered in minutes!
109 Questions
80 Questions
73 Questions
80 Questions
68 Questions