Question about GE SpaceMaker Microwave Ovens
Microwave Oven -- Model: PVM2070DMWW). I just replaced it a few months ago. Please don't tell me I have to go buy another one! Thanks for your suggestions. Put him up for adoption before he burns down
Question about GE SpaceMaker Microwave Ovens
...microwave as a replacement for about a year (Brandsmart replacement issue) but only installed it a few days ago. Worked fine but now internal fan seems to have stopped (heats food but gets very hot ...
...done by a competent person. A microwave energy leakage test must always be performed when the oven is serviced for any reason. Regarding parts, contact the seller here to purchase parts. (here in
Question about GE SpaceMaker Microwave Ovens
...microwave and the bulb broke off in the socket. How do they remove the rest of the broken bulb parts. I believe it is the metal part of the bulb? Please unplug the oven first! This is pretty common ...
Question about GE SpaceMaker Microwave Ovens
...microwave that has burned out. what do I do, and what bulb is the replacement This is pretty common and can be a pain. It's tacked in place with contact cement or hot glue, and sometimes there may ...
hot glue, and sometimes there may have been enough moisture to corrode and seize up. PLEASE unplug the oven first, and always unplug it when inserting or removing light bulbs.Otherwise, or a surge can
oven from the power line. Either can cause such a failure on the controller.This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too. I would not
...microwave). There was a flash and the bulb broke off. Does this mean I can't replace the bulb anymore? Anything I should watch out for? thanks. Yes, do be sure to unplug the oven first when removing ...
microwave oven does not heat, this is commonly caused by a failed magnetron. The magnetron is essentially, the heart of the oven that produces the RF energy that is used to heat your food. In order to
Question about GE SpaceMaker Microwave Ovens
Using timer function only, front panel went off completely and we noted the inside of the microwave was very hot. Either the control board or the keypad
26 questions posted
Usually answered in minutes!
3,405 Questions
257 Questions
57 Questions
46 Questions
27 Questions