...open the front door you can see the 2 cartridges. The one on the left side with the green button on it is the toner/developer cartridge. It is replaced most often. When it needs to be replaced you ...
...replacing toner cartridge & will not print A couple of suggestions 1) Open door and remove drum and toner. Hold Go button down until all lights are on. Put drum and toner back in and shut door. ...
Question about Sharp AL Office Equipment & Supplies
...be a small point which the machine uses to open the shutter when you close the door. If the shutter won't open or the point is missing (Broken off) the printer door witll not close. Cheers ...
Question about Sharp AL Office Equipment & Supplies
...open the front door, hold the go button til all lights flash, counter reset... After you close the door again, press the go button 3 times and you'll get a printout, at the bottom is a bar that shows ...
Question about Konica Minolta Office Equipment & Supplies
...i replace toner still asking replace toner replace toner error 1.OPEN THE FRONT DOOR 2.PRESS CLEAR BUTTON 3.PRESS START BUTTON 4.DOWN ARROW AND UP ARROW 5.PRESS OK 6.CLOSE THE FRONT DOOR Ready to ...
Question about Sharp AL Office Equipment & Supplies
Open Door Replace Toner" will be displayed. Open the door and replace the toner. When the replacement toner is inserted and seated properly, close the door. The system will load the replacement toner.
Question about Sharp AL Office Equipment & Supplies
Open the front door to access the toner 2. Press the "Clear" button. 3. Press the "Start" button. (When you press START the screen should clear.) 4. Press the "?" or "Down Arrow" button. 5. Press the
Question about Sharp AL Office Equipment & Supplies
door and open color cartridge then close the door and try to print,if print then replace color cartridge if no print then again try open the door open the black cartridge put the color cartridge close
Question about Sharp AL Office Equipment & Supplies
...will be the time to change it. Press the ink/cleaning button, the printhead will advance to the left, open the cartridge door, replace ink, close the catridge door, and hit the button again. thanks ...
...ip 2000 Check the following steps : 1: Unplug power and USB 2: Open door and hold power button. 3: Connect power. 4: Close door, then release power button 5: Connect USB and an press power to
119 questions posted
Usually answered in minutes!
55 Questions
33 Questions
27 Questions
26 Questions
23 Questions
