Paper Feeder is not pulling the paper when print command is given.Please help. The paper pick up fingers and rollers get smooth and polished with use and then slide on the paper. Clean the rollers and
...paper tray) Disconnected printer from electricity and rebooted PC. This did not help! I use an XP system. Any further steps I can take? Thank you. You will need to clear the "print queue" of those ...
not taking in paper i have fed it the paper but it still showsthe out of paper sign .But when it accepts the paper it of takes it from the right side & then it again shows out of paper sign. clean ...
...paper will not go through printer. it says thickness lever not to left. it is. i think its asking if you are using right kind of paper specified to be used with your printer there are alot of ...
not a paper jam. Any advice would be helpful. Try to open the printer cover and look for tiny paper shreds that might got stuck between the rollers. Also if your printer has a sensor, there could also
Question about Canon BJC Office Equipment & Supplies
...not, also check the paper is stuck or things that prevent the movement of paper into the paper tray. like a small pin or small objects that are often easy to fall in the paper tray. thanks and ...
Question about Canon BJC Office Equipment & Supplies
...not print in black was the first problem and now after less than a minute after turning on it has the light for 'on' flashing green and amber constantly Try this: 1- Pull the cartridges out, restart ...
Question about Canon BJC Office Equipment & Supplies
...paper is not pulled into the printer for printing It alway had trouble with thick paper but now it won't pull any paper through the printing process from back to front Hi The rollers need to be ...
...not take paper for printing. The BJC 3000 will flash two different colored lights in a pattern to signal several different errors. From the documentation I have the two colors are orange and green, ...
Question about Canon BJC Office Equipment & Supplies
not load paper, either by pressing (FF) or printing a test page, the 2 wheels turn to feed the paper but its like something is blocking it from going in. Thanks bill Clean the rollers; remove the top,
123 questions posted
Usually answered in minutes!
71 Questions
50 Questions
50 Questions
44 Questions
39 Questions