Carrier Weathermaker 8000 Gas Furnace 125k Btu "shutting down compressors" Questions

...should the air pressure be before it shuts down automatically it keeps burning the belt up also home compressors should shut down at 100 to 110 psl replace the electrical control unit on the ...

...until I shut it down manually. Please Help! your max pressure switch is faulty, and shutting off the power early. replace switch, check owners manual for location(should be near power

compressor fills,drains off a little but won't compressor fills to about 150 psi,drains off a little but won't shut down automatically sounds like the pressure switch is fused shut, more than likely ...

Unable to get compressor to start after overheating my thermal overload shut down my compressor(I believe), and I have not been able to get it started since(the shut down was 3 days ago). Theres a ...

what possible causes have an air compressor shut down before reaching max pressure? My air compressor shuts down when it reaches about 70 psi. Have changed the regulator, but problem still exist. The ...

we have a rotary screw IR compressor 50hp with intellysis controller. It shuts down and displays Start Fault 1SL. any suggestions? when does it shut down and what is the temp and pressure when it goes

dewalt d55155 compressor runs to 60 lbs then acts like not enough power and shuts down Looks like it's an oiled style compressor. Is it getting pretty hot by the time it hits 60psi? Might be low on ...

compessor trips circuit 2hp craftsman air compressor -- intially fills tank o.k - but when air pressure drops from uasage -- won't recycle -- trips circuit -- i replaced 15amp circuit with 20 amp ( ...

my air compressor wont shut off when its full like it use to. Hello Could be a bad pressure control switch. Depending on the size of the compressor it should shut down on high pressure via a pressure ...

1989 Ingersoll Rand 185 diesel compressor shuts down under load My 1989 IR 185cfm john deere diesel air compressor warms up and airs up my 200 gallon tank just fine. Once it's up to pressure and I ...