Dell 922 All-In-One InkJet Printer "tray 1 paper sensor" Questions

...Tray 3 Paper Size Sensor J820-1 (3T: J820-1 TT: J820-1 ) (+)J820-3 (3T: J820-3 TT: J820-3) (-) Is the voltage +5VDC? Yes No Using the wire network from Chapter 7, check the +5VDC circuits to Tray 3 ...

tray 1? depends on the printer, normal home use printer have only 1 tray. office printer usually have multiple trys. and usually the default for that is tray 2. tray 1 is manual feed. try to check the

...Tray 1. Test the Preheater Sensor using Service Diagnostics. Check system grounds. B3M B3N B3P B3Q B3S B3T The preheat flag timed out waiting for the paper picked from Tray 2. The preheat flag timed ...

...tray 1 paper size Tray 1 paper size is set to Legal I need to change it to letter size. You need to adjust the green paper size sensor in the back of the tray to letter. This is connected to sensors ...

...Tray 1 or bypass - tried to rest tray 1 and turn on/off, but the display still shows that there is no paper. What else can I try? There is a paper detect sensor which sits in the frame of the machine ...

...TRAY 1 FOR EVERYTHING BUT IT IS IGNORING THAT REQUEST..?? not sure if your on copy mode or print mode ..close the MP tray door....turn off then on go to general setup select tray 1. not sure if your ...

...tray 1 but tray 1 is full and is in a close position There is a tray up sensor that has popped off. Its a black flag type piece that moves up and down with the paper stack. Tray 1 can just be pulled ...

tray 1. Even if I manually select tray 2 or 3 it apparently defaults to tray 1. I can print from Multi-pupose. It is as if the printer no longer recognizes there is a tray 2 or 3. I haven't tried tray

...Tray 1 jam C2 Tray 2 jam C3 Tray 3 jam C6-1, C6-2 Jams related to duplex C6-3 Registration sensor, re tray 1 C7-1, C7-2 HCF feed problems C7-3 Tray 1 feed problem C8 Paper stays in tray or duplex or ...

...Tray 1 Plain Letter. If we press select, it will print In the printer setup menu. You need to change the paper type for tray 1. It's likely set to a different type of paper (maybe card stock?). The ...