Dell Dimension 2400 PC Desktop "switch repair" Questions

...switch out of it to make the repair. I checked e-bay and was able to find a complete case for $169.00 but I do not think you would want to spend that much just for a switch. You could purchase a ...

...switch mode power supply. Computer does not boot up The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact. Reseat the RAM and then boot up your laptop. If ...

...switch unless you have a full backup of your hard disk. Attempt to repair the damaged file, folder or file system index using Chkdsk. To do so, follow these steps: Click Start, and then click Run. In ...

switch would change to green. boot files are corrupt or missing.... only repair of OS will rectify... else u need to reinstall OS...if u have more then one logical partitions i.e. C:, D:, D: drive etc

...switch pigtail from the motherboard. While this can be a very simple repair, it also provides plenty of opportunities to damage motherboard with a static electric discharge. If you do not have access ...

turns off after fan starts Dimension switches on for about 3 seconds, fan kicks in, then the whole system shuts off change the power and test if didnt work the mainboard should be repaired or replaced

...switch). Eventually it comes to life. Any suggestions please? The mother board is on its way out, eventually you will need to replace it. Before you do check the power supply, if you can get hold of ...

...repair shop??? Thanks. [email protected] Check the power switch on the power supply - should be located close to the power cord entry. Place in the '1' position for ON. The '0' position is

...power LED (CR4G1) comes on but that's it, will not start up. Replaced power supply and entire switch assembly with known good parts. Any possible explanation other than bad motherboard? I have ...

...have some dust bunnies in your cooling fan. The high pitch sound could be a faulty monitor or the switch mode power supply. When the computer is running, turn off the monitor and if the sound is ...