Question about Dell Dimension Computers & Internet
...master and slave... also make the power is pluigged into both drives Robert Leave the cable connection as it is. That is, one ribbon cable for the 2 dvd drives and the original cable for the old hard ...
Question about E-Machines Computers & Internet
...Master instead of the slave drive Check the jumper on the drive. It should plugged into the pins indicating CS (cable select). Since it works as a slave the jumper is set to slave. Your drive should ...
...slave to a western digital 40gig hdd. drive is recognised in bios but I cant mount it to format it. Tell me, what OS do you have? maxtor if orginal to the pc it will always runs as the master u'll ...
...master and slave as slave. Using cabel select requires (I could stand to be corrected) one hdd cable with at least 2 drive connections on it, and you would want your 2nd (slave) drives jumper set as ...
...Master harddrive. Where it states Dual Slave is the setting for the Slave harddrive. Look at the label on your harddrive, and see if it shows the settings for Master. If not write down the Model ...
...Master with Slave present " . Connect the power supply cable. Most of the computer operating system's would detect the new harddisk once pluged in. If the new harddisk needs formatting before use ...
...western digital caviar hard drive to my computer. it is 160gb. It seemed to work for a short time. now it doesnt want to boot up. i got a bios upgrade as well to support the gb space. also when it ...
Question about Dell Dimension Computers & Internet
...master or slave then reboot and see what happens. If you have set this right then it is a possibility, with the noises you are hearing from the hdd that it is faulty, and may have been damaged in ...
102 questions posted
Usually answered in minutes!
2,074 Questions
1,169 Questions
1,075 Questions
718 Questions
514 Questions