Question about Intel Computers & Internet
no buzzer action or hdd led indiction etc. I measured the output voltages from the smps power supply to the mother board and its peripheral devices are normal. Try to reset the CMOS on the motherboard
cmos battery.Unplug evthing( HDD,CD,DVD,FLoppy) try to start barebone. Test voltage from power supply to motherboard. Try different ram. Good Luck. Firstly, does the lights in the front of the PC come
...CMOS, nothing. Any assistance would be appreciated. [email protected] The voltage output onto the three main rails as you put it is 12 volts and 5 volts. As you say that there is no beeping, you ...
output according the the specs of the battery used. 4. If you update the bios,you should select exit and save to CMOS. 5. If step 1,2,3 and 4 does not work try to reformat your computer but before you
...output to the hd or cd rom. I would love to here any suggestions thanks Joe we do leave the pc on most of the time Have you replaced the cmos battery(disc shaed flat 3V CR2032), although there could ...
CMOS battery are all fine but data refuses to show on monitor. Please i'll need help from any technician willing to. ...Bye... A) Power Supply: Power Supply has a weak voltage power rail. !O_O
...DVD unit, but unplugged the DVD drive now has power. I have removed the mobo from the box, cleared CMOS, and nothing will get the pc to boot. Has anyone solved this issue and determined the actual ...
...CMOS jumper Back Panel Connectors1 x PS/2 keyboard or PS/2 mouse port 1 x D-Sub port 1 x DVI-D port (Note 4) (Note 5) 1 x HDMI port (Note 5) 1 x optical S/PDIF Out connector 1 x IEEE 1394a port 6 x ...
Question about Genuine Computers & Internet
...cmos battery and it will boot up again. While booting up this time it will beep 5 times. I have tested the output voltage on all of the terminals to the power supply. They were all within specs. Any ...
2 questions posted
Usually answered in minutes!
4,857 Questions
1,171 Questions
1,019 Questions
802 Questions
712 Questions