Kodak EasyShare Thermal Photo Printer "need power cord" Questions

...power adapter from it. You then need to wait for at least 30 seconds for the printer to get reset. As a next step, you can connect the power adapter back to the printer. You can turn on the printer, ...

POWER CORD/USB CORD/REMOVE PAPER TRAY EJECT CARTRIDGE LOOK INSIDE THE DOCK WITH FLASHLIGHT TO SEE IF PAPER JAMMED IN THERE SOMEWHERE. IF NONE AND NEW CARTRIDGE TIME FOR SERVICE PROVIDER MAY NEED A NEW

...need some advanced troubleshooting. make sure that the power cord is working fine and try to restart your printer. if it does not work,contact KOdak @ 1800 421 6699, they are currently replacing the ...

...printerby turning it off n removing the power cord for a while and then reinsert it and onthe printer.but if color cartidge is actully faulty thenu will hve to replace the cartridge to make it

...power cord from the back of the printer while the access door is open Close the cartridge door once the cord is unplugged Reconnect the powercord, turn on the printer, then your printer will look for ...

power cord into your printer. 5. Wait 30 seconds, then turn on your printer. 6. Fan the paper to keep the sheets from sticking together. IMPORTANT: 1. Do not overload the paper tray. Load a maximum of

need to load paper. The printer tries to pull the paper into the printer (the rollers come on and roll) but the paper never goes through. This happens no matter how full I load the paper tray. Can you

...power cord back in. Hold keys down for 10 seconds or longer then release. This is supposed to release the print head and allow the cartridge to pop out when releasing the little green tab that holds ...

need to remove the ink cartridges from my Kodak Easyshare 5100 All-In-One printer so I can recycle the printer, but I don't have the power cord. Is it possible to remove the ink without turning on the

...power cord I need the one with the phone jack end that plugs into the printer. Where can I get one? That would be called an "ethernet" cord, especially if it looks just a little larger than a regular ...