...power supply cable (the small circular one) from the back of the printer. Open the front cover of the printer. Inside the printer, locate the silver metal carrier bar on which the print carriage ...
...with my old pc, and mean't the power supply was bad in my machine. So you may need another power supply. hola, perdi los driver de la impresora deskjet 1360 y no los consigo uds. me los pueden ...
Question about Lexmark JetPrinter Office Equipment & Supplies
green and red leds are blinking HiTry turning the printer off and on.Clear any paper jam on the machine.Disconnect it from the power supply and then re-connect it after a while.
Question about Lexmark JetPrinter Office Equipment & Supplies
...power supply (the small black box behind the printer where the power cord is attached) with the other end still plugged in to a known working power outlet. Look around the black box, it should have a ...
Question about Lexmark JetPrinter Office Equipment & Supplies
...on front. It goes on but the button below it is not lit. The CD doors wont open and the monitor stays bacl with a blinking green light. Is my pavilion RPied? Sounds like your power supply is
Question about Lexmark JetPrinter Office Equipment & Supplies
...Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert ...
Question about Lexmark JetPrinter Office Equipment & Supplies
...power supply from the back of the printer. 3. Then remove the cartridges from the printer. 4. Please reconnect the power supply back and turn on the printer. 5. If lights are blinking then printer ...
Question about Dell Office Equipment & Supplies
...power supply of a Dell Photo 926 has been sliced. Is it possible to change out the power supply? It would be impossible to solder the wires since ends don't reach. You can cut and splice the two ...
...Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert ...
...power supply. I believe the Current is rated at 2 amps. If you have a supply that is generating less than that it will result in having this same issue with the printer. It is bad power circuit ...
32 questions posted
Usually answered in minutes!
542 Questions
147 Questions
54 Questions
43 Questions
38 Questions