Ricoh Aficio AP600N Laser Printer "buttons hold down reset" Questions

...hold online + escape, then power on. Use up and down arrow keys to select SP2 Press Enter Use up and down arror to locate SP5 Press Enter Use up and down arrow keys to select 810 Press Enter Confirm ...

hold UP and DOWN arrows buttons together for about 6 sec. Then release it and press immediately ENTER button. Now you have to see SERVICE MODE. Navigate with narrows and OK buttons to SP7 DATA LOG and

...hold the buttons till you see service mode on screen , you need to go to engine , then drum , there you will find the setting to reset the pcu , or under data log is a function pm counter clear if it ...

...reset my Ricoh Aficio SP C811DN? Go into SP mode. Saw it there once when I was just fooling around in SP modes at work. Enter SP mode with pressing the yellow clear all button, then 107 and holding ...

...buttons should hold pressed. Please help Hold down the two arrow keys and count to 5, hit the enter key, the machine should be in serrvice mode if nor repeat. use arrow ke and scroll to machine press ...

...buttons in sequence holding down the stop button when you get to it. You should see a service screen come up if you do this correctly. Go into the first button (i think it says copy). you should now ...

...1 0 7 then hold down the red stop button for 5 or so seconds these must be pushed in that order. you will come into test mode, this resets the error, if it comes back you need a service call. ...

...hold the two UP and DOWN arrows together for about 6 sec and then released it and press ENTER immediately). You will enter service mode . Choose 2. Engine and press ENTER. theh search for 7. DATA LOG ...

...reset hit clear modes (yellow button) 1-0-7 then the clear (orange) button continue holding down until screen changes once you are in .. turn copier off.. if there is nothing wrong the problem should ...

...hold down the clear/stop button until the screen changes saying service mod, after that, while machine is still displaying service mode turn the machine off and then back on( don't use the MAIN POWER ...