...the pump will need to be replaced, if it isn't then the washer switch is defective, this switch is part of the turn signal switch. one side of w/s washer does not work on my 2005 chevy silverado ...
...washer problems? Here are some more common problems. Motor: The wiper motor is commonly replaced and was often not the problem. Don't replace the motor yet. maybe it's not the motor. It could be a ...
...Washer pump motor failures are common. It is also possible that the fluid in your reservoir could be frozen. (I don't know where you live, but for the most of U.S. it is winter and COLD!) Replacing a ...
Question about Chevrolet Equinox
...washer fluid to spray. When the car was under warranty we had to replace the pump but now its out of warranty and I would like to replace on my own if its not difficult. So if anyone can give me any ...
...the switch? Yes, you can remove the washer fluid tank by removing the battery and battery tray. once they are out, you can access bolts that hold that tank in place and it can be removed from the
Question about Chevrolet Equinox
...washer pump may need to be replaced. Here are steps to troubleshoot a windshield-washer pump. Try this link in case you are stuck: How to Troubleshoot Windshield Washer Pump Here is another YT video ...
Question about Chevrolet Equinox
replaced washer fluid pump and verified power to the pump but it wont work? first thing i would do is remove the rubber hose from the pump to the wipers. if fluid is coming out then you lines are ...
Question about Cars & Trucks
...washer fluid pump using voltage provided by the REAR WIPER 20A fuse. When the B+ signal is seen on the windshield washer pump control circuit circuit, the rear wiper module will apply B+ to the front ...
Question about Cars & Trucks
...washer fluid for rear window wiper on a 2000 blazer Open the hatch and look for the fill cap along the sides . Same place you fill for the front washer fluid ! Your fronts work but not the rear ? ...
replaced. Good luck. One of the following: There is no washer fluid in the reservoir. The washer activation switch or wiring is defective. The washer pump is blocked or defective. The washer tubes are
87 questions posted
Usually answered in minutes!
1,876 Questions
446 Questions
159 Questions
127 Questions
73 Questions