Question about Xerox Phaser Office Equipment & Supplies
PAPER IS JAMMED/TORN INSIDE NEAR HOT THING sounds like your hot thing needs replacement REPLACE YOUR FUSER UNIT
Question about Xerox Phaser Office Equipment & Supplies
...torn Our Phaser is printing and we are not receiving errors but the pages print with a large crinkle (crease/fold) at the top and have oil stains on them and are really beaten up. After printing the ...
...torn and part is left in the printer. I've also seen situations where labels were put through the printer and some got free and stuck to the inside of the printer causing jams. If you can provide a ...
...fuser unit. Torn Paper now stuck next to the roller/drum and now jams every time. How do I remove the torn bits of paper to keep it from jamming? sounds like a broken fuser drive gear.The fuser ...
...problem ? Fuser Film error, Fuser film torn. Replace upper fuser assembly or entire fuser If fuser film is intact, clean the white patch on the film usually it gets dirty and wont be read by the ...
Question about Xerox Phaser Office Equipment & Supplies
fuser sleeve has torn and is being ripped every time you try to print and pieces are coming out causing the bad print. You will need to replace the fuser, the part number is FG6-7947-150 you can order
...fuser roller/film life is over. Replace with new one 2. The fuser film is torn. Replace with new one. 3. Fuser heater is burnt. Replace the heater. 4. Fuser thermal sensor is open. Replace it. ...
Question about Xerox Office Equipment & Supplies
Xerox Workcentre 24- Paper jam in the fuser There is a paper jam in the fuser and the paper is torn. How do I clean this? Shut down. Unplug!!! Remove fuser to remove jam. Fuser may be or be going bad.
fuser sleeve that has torn and coming apart. The fuser is the part of the printer that melts the toner onto the paper. The Teflon sleeve in the fuser is where the heat comes from. When the sleeve gets
...torn. The fuser film is part of the fuser unit. This item is best replaced by a technician. Have you found pieces of film like material around the printer paper exit? It is most likely a dark grey ...
5 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions