Zebra 105Se Thermal Printer "printing faded labels" Questions

...printing labels with my Zebra S600 and everything was going just fine. But, when I finaly got the label printing out just the way I need it, the printing started to fade out in the midle label. I'm ...

...printing clearly. Its very faded, but the rest of the label is printing perfectly, and I changed the ribbon as well. Please help On the right hand side of the print head is a blue thumb wheel. ensure ...

when typing the print is faded Dymo LetraTAGs are thermal printers, so they don't use ink - just batteries and LetraTAG tapes. When the print starts to fade it's time to put new batteries in. When the

I seem to have run out of ink in my DYMO letratag. Can I refill? They don't use ink, just the label cartridge. If the print is fading, replace the batteries: Troubleshooting Poor print quality on Dymo

The printing is fading, more so on left of label, but also on right side of label Try cleaning the thermal print head. If that doesn't do the trick, the printhead may be defective.

...The label being used are still the same Most likely it is a quality issue with the label you are printing on. As long as the image is printed good initially onto the media(thermal paper), the ...

...faded printing hi, i have a zebra lp 2824, problem is that on label what is printed is faded and hard to read, any ideas?? Many factors affect print quality: Heat settings, speed setting and label ...

PRINTS ON ONLY HALF OF THE LABEL If the printing clearly stops, then the maximum width setting of the printer is not set to the full 4 inches (104mm) of the printhead. Go into the setup mode on the ...

...labels has been a little bit blotchy; the letters are faded in places. Now there is nothing showing up on the labels at all once they're printed. I type a word and it shows up on the screen, but when ...

ink is fading on my qx50 After using my qz50 through approx. 5 refills the ink is fading. Can I purchase another? Dymo Labellers don't use ink, they are thermal printers. When the print fades it ...