Zebra 105SL Thermal Label Printer "cancel ribbon error" Questions

ribbon or select Delete Job to cancel printing." I have installed two different CMY ribbons and nothing changes. I had the same problem and got information to update the printer firmware. Here is

...cancel or pause button to stop. I runs for a minute and then error condition ribbon out. I open the print head close and clears the error out and the labels start running again. I cant stop it!!!! ...

...Cancel" 4 timesTurn off power and unplug from power source. Wait for 2 minutes.Reconect the flat ribbon cable by aligning and carefully pushing into the conector on the main circuit board.Plug in ...

...Cancel" 4 timesTurn off power and unplug from power source. Wait for 2 minutes.Reconect the flat ribbon cable by aligning and carefully pushing into the conector on the main circuit board.Plug in ...

Cancel" 4 times Turn off power and unplug from power source. Wait for 2 minutes. Reconnect the flat ribbon cable by aligning and carefully pushing into the connector on the main circuit board. Plug in

...CANCEL button and connect the cord back. You are not able to connect the printer wireless due to this Error on Printer Screen. Probably.. this could be Hardware Issue if you still get this Error Here ...

...error message and push "Ok".5- Unplug power source.6- Reconnect the flat ribbon cables by aligning and carefully pushing into the conectors on the main circuit board.7- Plug in power source and turn ...

...Cancel, Black and Color buttons while turning it off, I turned it back on, it turned itself off and I turned it back on again, it started off doing the calibration and it took about 5 minutes, but ...

...Cancel" 4 times 12- Turn off power and unplug from power source. [NOW WAIT FOR 2 MINUTES]. 13- Reconect the flat ribbon cable by aligning and carefully pushing into the conector on the main circuit ...

...Ribbon back on to the take-up core. Press Resume to continue or Cancel to abort. Thank You........... Hi Every one there,I Bought HDP 5000 and Issued a  print Command, it gives me Error 99 with ...