2008 Keeway FAct 50 "adjust headlight left right" Questions

how do you move a headlight upwards on a moped If you look down the under mask, you will see the screw to adjust the height and depth, and screw screwing left or right. (:

...adjust headlight beam vertically on GS 500 '03 Wanted to adjust headlight beam higher, loosened L+R bolts, headlight would NOT BUDGE, then the nuts came off inside the headlight casing! Downloaded ...

Adjusting dipped headlights Locating the dipped headlight vertical adjustment screws. there are 2 screws for each light one in the bottom left and one in the top right (6 total)

headlight adjustment on a '99 Triumph Tiger how do you remove the cockpit to adjust the headlights? 1) Remove the perspex screen 2) Detach the indicators (left and right) - try to take the weight off ...

adjust the steering head bearing from a 2008 HD road king classic Jack bike so front wheel is off the ground. Push handlebar to left until front end starts to continue turn by itself. When it hits the

...left side of the headlight! There will be adjustments to make but it will be easier to see from the manual and you can download it free here: ...

...headlight alignment I have an R1200RT LE and the headlights are pointing MUCH too high! I have found two hexagonal nuts under the fairing - I believe that the one on the left adjusts the UP/Down and ...

...headlight beam being too low.Neither allen key at rear of dash will make it go any higher.Any ideas how to adjust higher? The adjustment you were doing was the horizontal (left/right) adjust. The ...

...adjust upward. I've turned the screw on the left side of the headlight (viewing from the seat) all the way in and it doesn't make a difference. What am I doing wrong? flow deper light ...

...look for a screw in the headlight rim, about the 10 o clock position if you were looking at a clock. This scew will adjust the beam, up or down. There may be another screw for adjusting left or