Cobra 29 WX NW ST 40-Channels Base CB Radio "setting cb dead key" Questions

...CB radio by FCC regulations is only supposed to have a max of 4 watts total output. If you can flip it to 7 watts dead key, you are doing really good. It won't do much more then that. It sounds like ...

...dead key on a cobra 29 ltd I need to know which pod is the dead key adjustment pod......thanks ok .ther is no pot per say ,But if you are wanting to turn the dead key down you can adjust the choke at ...

...dead key. I lowered the dead key to a 2 watt dead key. Well found out that with a rfx-75 when you talk on it and the rfx gets warm the dead key will drop. Since i set it to a 2 watt dead key it ...

...dead key setting for an ampifier. Each amplifier requires different dead key to operate at it peak effeciency AND to sound the best it can. If I knew what type of amp it was I could give you a better ...

CB has been tuned and peaked. I just replaced the meter and it spikes hard when keyed. How can I adjust it without degrading the tune? It could be the variable resistor that sets the meter movement or

...CB radio transmits dead keys with 4 watts of power, and transmits with 4 watts of audio. a 4 watt dead key is too much for a linear amp. You will smoke the transistors. Also, 4 watts of audio is not ...

...But FCC doesn't care any more. If you need more wattage then that, you will need to get an AM linear amplifire. The radio's dead key must be set to a lower dead key to run it with out burning it

...CB alone for a few months due to DXers being the only mail I can read in this location. The problem is back. When the RF power knob is turned fully up, I get a high dead key reading on SSB (with out ...

dead key I am installing a amplifier and the dead key needs to be lower it is running about a 6 some amps like the 6 watt output others don't .Since its a new model radio it may like the 6 watts too.I

...cb antenna or a dummy load. Then put the far right knob on either the 20, 200, or 2000 watt setting, which you will read on its corresponding scale on the meter. When you just push the ptt switch on ...