...switch unit to a repair man to have the switches replaced, or the whole cuicuit board. He took one look, sprayed the whole board with WD40, and said try that! When I put it back together, the on/off ...
Question about Sony Televison & Video
...volume up switch. Unsolder it from the board, and see if problem goes away. Very common problem. Since only one function can work at a time, none of the others will work until you "release" that ...
Question about Sony Televison & Video
...blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13
...switch it back to channel 3 for the cable hookup sounds like the little button switches are leakey they are mounted to the board and are very small may need to replace them. They are right behind ...
...change the TV/VIDEO setting (button adjacent to one of the volume buttons. I'm wondering if the board with all the switches may be defective. Have you seen/heard of this before? Any ...
...blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13
...change the switching regulator also,its also on G board..use a desoldering iron to remove parts, then wick wire to get the access solder off the pin holes to resolder parts.hope this helps..... which ...
Question about JVC Televison & Video
change the circuit board will the remote control still work ?? Are there any adjustment to be done.??? Rick Cashion The fault may be the control panel, or it may be in the uPC itself. Most of the time
...itself without any input. Most of the time it is the front contact switches Dirty clean them with contact cleaner or replace contact buttons on front panel board 29 cents each Call Mats ...
...change D6116,D6301. they are all on the G board.use a desoldering iron,Oh,make sure the tv is unpluged from outlet.Also check for bad wiring connections,bad solder joints.Use a good solder for good ...
14 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions