Meade Autostar Telescope with Tripod "reset controller" Questions

...controller. If you move it to another type of Meade telescope you must RESET and do Calibrate sensors and Training again. The dis-assembly pictures are located on the Mighty ETX web site here: ...

...reset the controller or to reload the firmware inside the hand controller. The firmware is probably corrupted. You can contact their repair and support web site here: ...

first RESET the hand controller and see if this corrects the problem and if NOT then reload the latest hand controller and or motor controller firmware, using the Celestron update cable and a computer

...RESET on the hand controller and then re-enter time date and site-- If this model has a Calibrate Motors feature in the hand controller do that also. You must have fresh batteries in the scope or the ...

RESET on the hand controller --- also the b. Some of these scopes have a brightest adjustment.===rightness and contrast may be set too high. The problem will be navigating the menu tree without seeing

...controller. DO a Reset and reload the firmware. Try to borrow another hand controller and buy a new cable. If these two do not fix it then it's a mechanical problem or a circuit board problem inside ...

reset ON THE HAND CONTROLLER AND RELOAD THE LATEST firmware. Make sure you are using a separate 12 volt power pack and NOT the internal batteries. After the reset do a Calibrate motors-- you must also

...at this time." RESET the hand controller and then re-enter, Time, Date, and Site, and Standard Time. After the above do another alignment. If nothing -- then reload the hand controller

...the country selection appears. DO a RESET on the hand controller and start over again. See the manual for how to do a RESET which places the hand controller back into the factory default

...RESET the hand controller and reload the firmware using the proper computer cable and Autostar Updater Version 5.9 available here: http://www.meade.com/support/auto.html ...