Philips 46PP9302 46" Rear Projection Television "phillips tv blue line down" Questions

Phillips rear projection tv model #60pp9202/17f I have a 3 year old phillips 60PP9202 t.v. that has red lines at the top of the screen and at the bottom a double image of the picture in red. The red ...

...tv try to open but shut down y try to push the power botom it's make no difference the light near the power botom is flashing no power no image no sound noting. i think it's the power suply but i'm ...

...TV shuts down then, CRT is at fault. If not, try to play with blue "screen" control of "focus block". Black plastic module with bunch of thick wires attachad to that. Has 3 "focus" and 3 "screen" ...

...Phillips rear projection tv. The blue mulitipoint ajustment is not working. It will adjust left and right, but not up and down. This is a very common failure on Projection sets. Its called a ...

...Phillips big screen has double images and double words. Pictures with rolling lines at the bottom are double and curve. How do you fix this problem Projection TV sets need to have all three colors - ...

phillips tv that is showing a red line and also a double figure. the red line is along the outline of persons, numbers, etc. etc. Your TV most likely has a convergence failure. ( common problem ) Here

...Phillips TV Model No. 46PP93 0217. The I have a Phillips TV Model No. 46PP93 0217. The TV works fine exect that the picture is very ''fuzzy'', and everything haze a hazy look to it. My Father gave me ...

...Phillips Magnavox TV (9P5511C1) has a red "aura" in the middle of the screen. The picture has also lost it's crispness and appears dull. When adjusting the convergence the cross it not totally white; ...

...Phillips Model 60PP9753/17 projection tv.I have the top and bottom of the screen bowed inward toward the center. I read the article on convergence and set manually the convergence.The color is ...

...tv. To solve this problem all you need is a flat and phillips screwdriver. Right below your speakers on the right and left side are tabs. Pull out the tabs and remove the screw on eachside. Once that ...