cover, you will see the back of the DMD/light engine. There should be 3 screws (3 on the 50 inch anyways) holding a rectangular silver metal case. Loosen those and adjust so that the screen is correct
...50-inch DLP First, screen had white vertical lines with picture and sound. Now no picture but still have sound. What parts do I need to fix this and how? This is a common fault as the set on ageing ...
Question about Samsung HL Televison & Video
...inch fans. The ball bearing ones don't do this HOWEVER they are noisier which is not suitable for your use. Sorry to say it but Fredy2 has no experience on this set or he would know it is the color ...
...cover from the back of the TV by removing the screws with a Phillips screwdriver and slide it out and away from the TV. Remove the screws on the lamp assembly and slide it out of the TV. Disconnect ...
Question about Samsung HL Televison & Video
...cover from the back of the TV by removing the screws with a Phillips screwdriver and slide it out and away from the TV. Remove the screws on the lamp assembly and slide it out of the TV. Disconnect ...
Hitachi 50 inch how to remove screen cover' Pull off Front speaker cover you will then see bolts holding face plate remove all screws then slide screen upward and Off. HAPPY NEW YEAR!
Question about Sony Televison & Video
...50 inch tv where is the amp located on the sony wega 50 inch tv remove the two small covers left and right behind the front lower panel.remove front lower panel (its a firm fit) pull in this sequence ...
...50 inch Phillips tv model #50PL9220D/37 wont turn on? blue power light is just flashing ? what could be the problem? Hello more than likely the lamp has gone bad. On that set you have to remove the ...
...cover with a Phillips head screw driver Remove the two screws that hold the lamp in place. Remove the lamp unit by holding the lamp handle, then pulling outwards. Exercise caution when removing the ...
...that need to be done to the tv before moving ~ it is a 50-inch tv, and being older it's quite large. keep in upright postion. try not to jar. remove bottom front panel speaker cover, can blow
292 questions posted
Usually answered in minutes!
445 Questions
373 Questions
297 Questions
280 Questions
214 Questions