Question about Office Equipment & Supplies
...toner control. • The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run. Causes Defective toner sensor. Poor contact of the toner sensor connector ...
...Toner level sensor/K (PS16) Printer control board (PRCB) -- Step Action: 1 Check the connector between each sensor- PRCB PJ21 for proper connection and correct as necessary. - - 2 Replace the toner ...
Question about Canon Office Equipment & Supplies
...times; still, the developing assembly toner sensor does not detect the presence of toner. Replace the developing assembly toner sensor. Replace the sub hopper toner sensor. Replace the DC control ...
...times; still, the developing assembly toner sensor does not detect the presence of toner. Replace the developing assembly toner sensor. Replace the sub hopper toner sensor. Replace the DC control ...
Question about Sharp Office Equipment & Supplies
...Toner level sensor/K (PS16) Printer control board (PRCB) -- Step Action: 1 Check the connector between each sensor- PRCB PJ21 for proper connection and correct as necessary. - - 2 Replace the toner ...
...toner sensor fault or disconnected connector on toner assy or on dc controller. You need to check the sensor on toner hopper, on toner station and on dc controller. after reconnection of mentioned ...
...toner control. ? The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run. Try removing and refitting drum and toner. if this does not help you may ...
81 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions
