...back of the projector). I clean those separately, and I even use a detail brush to get into each fan blade. I also put the duster nozzle into the blower vent and blow it out. TIP: Be careful! the ...
...InFocus and told them my color wheel broke, and they said it would cost $259 to fix, plus $30 for shipping back. http://www.avsforum.com/avs-vb/showthread.php?t=556431 pictures from Jay C ...
...color wheel issues. The reason I mention this is I just repaired a Optoma EP721 (very similar to the HD65) that had this issue. most likely it's overheating. My optoma hd20 started showing this ...
...color to be correct on my Sanyo PLC-XU74. How do I get the reds to be red and not royal blue? This is frustrating. computer set to high 32 bit. Tried the colour adjustment settings, RGB/photgraphic, ...
...color got worse. It almost became a old black and white movie. Turn the projector of properly, waited for 15 minutes. Started it up again, looked great for 2 minutes and started the problem all over ...
color shifts from normal to red and after adjusting will shift to green then back to red or green. We can't get through a movie without having to adjust at least a dozen times. Help this common to dlp
Picture turns blue After about 45 minutes the picture changes into a blueish tint. It seems like no other colors are showing except various shades of blue that make up the picture. The picture is not ...
Question about Office Equipment & Supplies
Do u repair that kind of problem You have to disassemble the projector until you get to the color wheel, if the colored tabs are not shattered, you can use krazy glue to stick them back on the wheel..
...back ? Yes thats right. There are a correct sequence. Must be (from left to right). The piece whit out color, the pink piece, the green piece and the yellow piece. If the color wheel have more than ...
29 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions