Hitachi 61SDX01B 61" Rear Projection Television "netzero net email" Questions

...is for a (wd-73733) is for a 2007 DLP type tv---this model has no convergence circuits--it uses an optical light engine---what is wrong with this set? my direct email is: ...

...netzero.net Thank you VERY VERY Much RON I know it's out there... Check here for the download. You may want to get a new winrar download to open the files. Good Luck. The file you are talking about ...

...netzero.net You can buy the chips this set uses for about 12 dollars plus shipping ON EBAY! I do this here for free so if this helps you give me a vote here. If you have any questions or need more ...

...to safely replace the chips; then the set needs to be adjusted in the regular and HD modes. If this is helpful, give me a vote. if you need more direct information email me: ...

...part is not too advanced. Hey, you are in my area--I live in Santee--let me know if you want me to do it. shoot me a email if you want my instructions so you can do it yourself. ...

...email--you may have a bad cap in this set--it is location C707--if it is gone there will also be a 2 amp pico fuse blown---I can tell you where to look for both parts and what they look like--if the ...

...etower.766@netzero.net The convergence ic chips are usually located on the right side of the set as you look at it from the back on a large finned piece of metal(it is a heat sink to keep them

...netzero.net--2 and then 3 blinks is deflection circuit problem---what was wrong with set to begin with? check f2,f3 fuses also: this could be error 23 overheat check the ic's and, chips: chroma etc. ...

...to put it in the cable band and autoprogram it----email me if you need instructions for this and I will give them to you. etower.766@netzero.net If this was helpful I would appreciate a vote from

...ideas? Yes, you have a bad convergence Ic--set uses two of them---have someone change both and adjust the set in the Tech menu--if you need more information or help email me