Brother MFC 9600 All-In-One Laser Printer "changed toner brothers light" Questions

brother 8840 printing very light. we have changed everything brother 8840 printing very light. we have changed the toner, fuser, and drum. What else could it be? See if its on Toner Save setting.

...light too much. If it is your first toner replacement you shsould only need the TN-360, as the drum should be good for about 12,000 copies. The machine will tell you when you are getting close to ...

...the display reads "Toner Save: OFF". c. Press OK. d. Press STOP/EXIT. e. If the setting was changed from ON to OFF print the User Settings list by pressing the REPORTS key and then 5 (User

...toner and even changed whole drum and toner unit with drum from another printer that works fine.(same model drum and toner) -open front cover -press 'Option' button -then key *00 on the keypad -This ...

...toner prints so light that it is almost unusable Return both and get a fresh batch. You could have gotten a bad drum or toner. But first take out the toner and get her a good shake just to loosen it ...

...changed the drum unit, the toner cartiridge, cleaned everything it said to clean in the owner's manual and on the brother web site (including the corona wire). Still, I have poor print quality with a ...

...changed out the toner cartidge and drum. Still printing blank pages. Any suggestions??? hi i have the same problem after replace the fuser the problem is in the little board ,where all the connectors ...

changed drum and toner twice as i'm a brother re-seller at the end had to call brother italy where i live made some tests but at the end they will change the mf with a new one as i sold it less than a

Brother mfc-8480 with light print Light print after drum changed Could be toner life end or laser unit is weak.

...changed the toner and drum and it?s still doing it, can anyone help !!! You need to remove the toner again, take a soft cloth and wipe the lens that is on the top inside.It is about 1 inch wide and ...