InFocus LP 530 Multimedia Projector "error source" Questions

...source error? My unit starts up and in less than 30 secs the lamp turns off and thegreen light starts flashing. Then after a few minutes, it comes backon, only to keep repeating the same cycle. The ...

...SERIAL NUMBER Q8EF111AAAAAC0295 INPUT AC 1.00-2-40V-50-604Z3.3A Hello Abugah, For "no source found" errors, we recommend starting with the input device and the wires (assuming you have selected the ...

...the projector can handle the low res output OK. Then increase screen resolution on the PC unitl the error message appears. Try the video menu settings in the ...

...source, and the CD I was listening to had ended. As usual, it powered itself off due to inactivity; I set the 10 minute timeout months ago to conserve hours. Anyway, the ****** won't light up. Tried ...

6 blue blinks of the power button then 2 red blinks of the ready button That code indicates a fan-2 error. These projectors generate a lot of heat and depend on air circulation to keep everything cool

...error display. May this help, best regards, melnavz IN24 does not require a device driver it utilizes the video display drivers built into the Microsoft Windows OS. You should be able to simply ...

...source then use hair dryer to heat up the unit by blowing hot air through the right side of the projector (power button side) for ~ 30 secs then turn power on, the power button light should be steady ...

...error messages on the projected image if they were there? try really hard to read them if you think there could be something there. Try a different input source, unlikely problem but possible. ...

...error message. There should be two LEDs, one of which is the Lamp Indicator, and the other is the Temp Indicator. It's possible that an overheating problem has caused this. Make sure the projector is ...