InFocus ScreenPlay 7200 Multimedia Projector "faults" Questions

Problem on Picture I have a NEC VT460, when switched on without an input signal, I can see on the RHS of picture a large finger print, it is not an actual finger print, it looks like a VIDEO fault, I ...

sanyo plc-sw30 i have a problem when i power on the projector , there is no power lamp on a very slow light is visible and the projector shut down and the fan are in very high power The uProcessor ...

NEC LCD1760V shuts power down after 3seconds Power shuts down after 3 seconds Hi Ron usually power down issues are caused by faulty power supplies especially if the projector looses power completely ...

Projector won't turn on, Lamp/Cover light on solid, On/Standby flashing. Can I reset the bulb's timer and make it work? This is a known fault with some early HS10s. There is a sony tech bulletin ...

...hours,sometimes even minutes. If you are in situation 2 , then there is an internal fault. Common faults that can occur are a blown capacitor on power board, a convergence IC has blown, or a fault ...

i buy a new lamp but still not workin the cover lamp not stopin too show me This is likely the same as posted by newtbert on Nov 22, 2009 I've included the text I posted for that here: This is a known

I have a vivitek projector which produces white and black horizontal lines through the image. The menu will not display and neither will any input. What exactly is the problem? I have tried ...

SHARPXR10XL DEALAY PROBLEM HelloYour problem post is very difficult to understand.  Please provide some more details about the fault.  What do you mean by this "delay problem"? Please ...

Projector starts up but after 30 seconds a red fault light comes on NEC LT25 projector Red Fault light You might require a new bulb, or check the fans to make sure they're all still spinning.