Question about Rangemaster Kitchen Ranges
oven with the draw underneath. The gas lights ok with no problem, but it doesn't matter where you turn the control knob to, the flame remains small and the heat doesn't get above a 'keeping warm level
Question about Rangemaster Kitchen Ranges
...oven, as I think, it is gone. When this cooker has an ignitor that works by pressing the knob, then all knobs work like it is one knob. That means, if no sparkplug ignites, then there is a problem ...
Question about KitchenAid Kitchen Ranges
...oven range. Left lower part of ceramic stove top that has single/dual heater sizes is malfunctioning. Single one is still working but from recent dual does not.I do the same as before on my ...
...gone bad. Remove the floor panel in the oven and locate the ignitor fastened to the burner. There should be 120V going to the ignitor harness. If you have voltage but no ignition, change the ignitor. ...
Question about Kitchen Ranges
...gone off. I pushed the oven off button and nothing happened. We have lost our manual. How do we got it to go off? advance the clock to the same position as the start knob and oven will go off, but it ...
...oven the thermostat might be gone or there might be a problem with the switch or the heating element the best idea is to have a proffessional look at it since it could be any of those 3 just click ...
gone thru 2 sets of knobs for my LG Gas Stove. Even when I put JB Weld inside the knob to hold it together the knobs only last for 7-8 months of use. I am looking for a universal know with
Question about Kenmore Kitchen Ranges
oven temperature sensor, if it's gone bad it will not send the proper temp reading to the control board. Or it could be a bad control board itself. If nothing is working/changing mode it's most likely
gone out of calibration. I had an oven with the exact same problem 2 weeks ago. It is better to call a serviceman and have it replaced as it isn't an expensive part. Smeg Range cooker . Initially oven
...gone bust - is there anywhere to get this part? do you have a clue where i can grip some knobs for lofra gas cooker. MXUD66GGI. i have tried every where can you help me.thanxs. Hi lofra mod mxud66ggl ...
55 questions posted
Usually answered in minutes!
22 Questions
6 Questions