Konica Minolta magicolor 2430 DL Laser Printer "showing paper jam" Questions

...paper jam at paper tray and printer stops after printing 3 or 4 pages. I open and close the top access and printing resumes for 3 or 4 more pages...stops and shows paper jam at feed tray. Repeat open ...

...paper jam printer displays error light and will not function 1. Step 1 Turn the printer off and on to see if it can automatically clear some or all of the jam. Many printers provide an error-code ...

paper jam. after removing the jam the ready light comes on and when we try to print again the screen shows it is preparing to print but it does not print This error message is displayed by the printer

...paper jam and have opened all the doors to check everything, however it still reads 'switchback jam open front cover up scanner unit' Step 1 Turn the printer off and on to see if it can automatically ...

...what to look for or do at this point. TIA John fix your cartridge again to its position . also check there is not any paper jam. open back side case of printer then check thee is not any papaper

paper jam, no printing, constant error My printer was working fine until it ran out of paper. I replaced it with the exact same paper, and then it jammed a few times, then it only partially picked up ...

...paper jam error at transfer roller, after I cleaned the printer -laser head. My 2400W was standing a long time without being used, and when I wanted to use it, it made a very faint image and showed ...

...Call Technical Support The printer makes a noise and stops printing. The screen shows a red wrench in the printer, and the above message appears. refix ink cartridge and check there is not paper jam

showing and the printer will not start up. I disconnected the power source, rechecked and reinstalled the imaging unit, but still not luck. Any suggestions? thanks When I had this problem the solution

...paper jam, the paper was shredded in pieces. I had to use a screwdriver to fish the shredded paper out of the roller. The printer is working again but now there are two white spots size of of 3mm ...