Konica Minolta magicolor 2400 Laser Printer "roller wont rotate" Questions

...wont pull the paper in. I can manually turn shaft and get the paper to start - I think it is out of rotation and will not continue after I install the cartridge. dont understand your problem quite ...

...pulled through on the right?? Any ideas on how to fix that? It could be a piece of paper or something stuck bet ween the roller cogwheels if so most probably the roller would skid and it wont rotate

...wont feed makes loud grinding noise I kept having paper jams and out of paper errors. I took cartridge of the back and cleaned the rollers. one side of roller has a spoke gear. when i turn the roller ...

wont-feed-paper.html You need to rotate the rubber band on the feeder roll to a fresh surface. Start by turning off the printer, disconnecting it from power & data feed. Remove the two screws from the

roller is where it was, but there is no torque limiter behind it. Note that without the torque limiter, there is no "groaning" noise. I know exactly what you are talking about when you say "groaning".

...wont grab the paper and it keeps on telling me it is jamed please help You can find the manual at ...

...the roller wont engage thats a out of paper message appear..good luck just post back if you have question much appreciated if you cn click the 4 thumbs uo button for my effort this keeps me

...the transfer belt rotating). This appears to be common. Sometimes the belt can slide on the rollers to the left, thus the square metallic reflective spot on the belt does not pass over the

...wont feed the paper, you can try cleaning them with some windex or alcohol but do no try to rotate them as there is a clutch and it can break, after gently cleaning the rollers wait a few minutes to ...

...wont feed straight and goes to error Hi You must have a paper jam somewhere in the paper path. Remove all the paper, gentle rotate rollers and make sure there is nothing. Also remove all covers that ...