OKI MICROLINE 320 Turbo Matrix Printer "print settings" Questions

...Settings The print quality is set to UTL and as soon as it starts printing it jumps to NLQ? Any ideas. Can't seem to keep it set. You need to set it in Menu Mode - Press MODE - the SEL light will go ...

...settings for print quality and character pitch are overridden by software commands. The lights will always reflect the printer's state. Press PRINT QUALITY to select: NLQ: Near Letter Quality ? ...

...code page to usa. Menu Mode 1. Verify that paper and the ribbon are installed. 2. Power ON the printer. 3. Press SELECT and place the printer OFF-LINE (SELECT will not be lit). 4. Press QUIET to ...

...internal menu and on print driver on pc. See Oki manual for printer settings its written on the front of the machine i think menu and set power on, then print to see settings then read

...print the menu settings by going into menu mode (Shift+Sel keys) then pressing the print key. Then I would reset the printer to defaults by turning it off and turning it back on while holding the ...

...print jobs. You can check the settings of your printer by going to the control panel and clicking on printers. Select your printer, right click and go into properties. The setting for this is usually ...

Problem with oki microline 395 I have a problem with my OKI microline 395 printer, it print well but I can't understand which languge does it use. I want it to print in english version so that I can ...

Printer font default WHen I try to change the printer font to 17....it automatically goes back to 10 font when I send a print job. How do I change that? OKI printers tend to only print in the font ...

...settings are the same on all four of the XP comps. Do you have any clue, what might be wrong? Print the Menu Setting out on printer and menu setting out on pc. Match sure emulation matcheds on both ...

Printing in one direction only My Oki 521 is only printing in one direction and I made sure it is set to bidirectional print in the setup. Your printers alignment is out that is why it prints only in ...