Husqvarna Riding Lawn Mower 42 Inch Cut Yth2042 "cuts gets hot" Questions

gets hot it cuts off crank back up run a min cut off when mower gets hot it cuts off, you can crank it back up it will run a min or two again and do the same thing 1 of 2 things happening first change

...deck engaged. After several starts engine cuts out, deck not engaged. Checked fuel is arriving at carb. try changing your spark plug. sometimes they will break down after getting hot or under a

gets hot. Tried the suggestions mentioned but to no avail it's still doing the same thing. Briggs and Stratton twin v 22hp. Sears Craftsman Any suggestions anyone? sounds like you have magneto getting

gets hot. I changed the fuel and air filters. The fuel is fresh. Fuel lines are not clogged. I also changed the fuel pump. Fuel lines are not close to the engine. Sounds like the coil is breaking down

warmed up but it still cuts as good as it did when it was new.the blue smoke doesnt show up until it gets warmed up no smoke til it get hot. it still runs cuts but rough Check your air breather filter

gets hot? my model is a 23-46. Thanks for your help. r shreve THER IS A FUEL SHUT OFF ON THE BOTTOM OF THE CARBURETOR. IT NEEDS 12 VOLTS TO IT WHEN RUNNING, IT MAY BE BAD, OR THE COIL, CHECK FOR SPARK

...gets hot it won't run. Early in the morning it will run fine for hours but in the afternoon it won't run 10 minutes without spittin and sputtering and then cutting out. What's the problem. probably ...

...gets hot the valve clearances change could have a bad ignition coil.when coil gets hot wires expand loses contact inside when cools down remakes contact. when engine shuts down check for spark right ...

...cutting again but for only 2 to 3 minutes. I bypassed the seat switch already and it still does the same thing. a bearing is siezing up when it gets hot,check spindles for heat and replace bad ...

...gets hot at which time it will stop pulling. The cut is decent but the mower bogs down, which further indicates a stretched belt, I guess. I need the proper belt length as I don't have a parts ...