Mitsubishi HS-U448 VCR "l1 l2" Questions

L1 without a remote control ? Thanks you :) Can't be done without a remote. Most universal remotes won't change the input to L1 or L2. Logitech Harmony One works, though. It's not cheap, unfortunately

...L1 and L2 channels don't work. I DID IT BEFORE BY PRESSING L1, BUT IT DOESN'T WORK ANYMORE. Does anyone have any ideas?? THANKS!! go to the menu and select auto find or auto program channels. good ...

I lost the remote and i can't change it from l1 or l2 You must purchase a universal TV remote. Then use the included instructions to program the TV with the new remote.

...properly but when recording channel 3, it only records the picture and not the sound. Is this when you are recording via CH 3 from a separate source? If so, try CH 4 or alternately, L1, L2

monitor and record with our vcr. The monitor instructions say to be sure the vcr channel is set to A/V mode. How do we set to A/V mode? Most you channel down until below channel 2 and it says L1 or L2

...all we can get is CH23 or L1 or L2. Why won it change? please contact me by phone I will walk you thu it

Thanks Frank
@Tech
http://www.attechcomputers.co.cc
3868607368

way this can be fixed? When trying to program a show on my Sylvania Model DVD/CD841G when it tells you to put in the channel it comes up automatically with L1 and L2. What is this and how can I fix it

...L1 And L2. What has to be reset with the digital cable input?? You will need to use L1 or L2 (one is probably on the front of the VCR, and the other on the back, they should be labeled). YOu need to ...

L1 on the channel selector. To record from the line input, there is a button on the VCR's remote called INPUT SELECT. Press this button to get your line input. You press it once to select and again to

02, L1 or L2. Can you please help? You need to run the autotuning feature on the tuner setup page. It doesn't yet know what channels are available to it and is defaulted to the minimum. Hope Ya Fix it