remote control helicopters and real ones.To stop this from happening you need to make sure the tail Rotor is going correctly OR probely the best thing to do would be take it back to the shop and get a
remote control. Unfortunately you can't. You will need to change the receiver or the transmitter so they are both the same frequency range eg 40mhz or 27mhz. Then you will need to check the crystal is
...Remote linking:0) Obviously, helicopter will operate best when fully charged... if charging light gets brighter when unplugged from helicopter, then it's not at full charge. Charge fully, then ...
...Remote Control (not include batteries) 1 x USB Charger Cable ( FREE ) 1 x Tail Blade ( FREE ) ------------------------------------------------------------------------------------------------ I hope ...
...fly forward or sideways? it may be a problem in your remote control of your chopper. if you have the Warranty card and speak about the problem. it may replace your chopper or repair it. All The
...remote control..... or may be the blades, either of them may be, got damaged some how and are not providing enough force to push the air and keep heli stable... kindly check these few thing and ...
hobbie shop? They have or can get just about anything. You might be able to find it online but your best bet is the hobbie shop. Good Luck
...with the information you supplied. The motors or example, fuel or electric? Makes a difference. Best regards ...
...remote control is new. The helicopter light led is good, to flare up. 0) Obviously, helicopter will operate best when fully charged... if charging light gets brighter when unplugged from helicopter, ...
remote) push the throttle control (left joystick) up until the blades move. This what the horribly translated instructions mean by setting the helicopter and controller together.Don't charge
73 questions posted
Usually answered in minutes!
47 Questions